Aica Melt is specially designed with unique properties to meet customers’ requirements in the assembly of various products like lid and consignment note pouch for LDPE and HDPE courier bags, car carpet and upholstery, electrical appliances, fibre optic cable and geo-synthetic textiles.
Assembly
We have experienced R&D expertise to customize hot melts to meet our customers’ requirement for open time, viscosity, flexibility and temperature resistance. Our products are constantly redeveloped and researched to meet the increasing demand in the assembly processes, such as speed time, transportation & storing conditions, etc.
Pressure Sensitive
Pressure sensitive hotmelt are designed to have the right level of tack to enable bonds to be formed via pressure only. Aica Melt offers broad range of pressure sensitivity levels including removable and permanent.
Aica Melt is a light-colour and low-odour fugitive hot melt, a low-tack adhesive that produces a removable, non-permanent bond. Fugitive hot melt are widely used for sample attachment on magazine, brochure, and credit card affixing. This product provides temporary tack adhesion and will not damage paper or other substrate surfaces. It is clean and easy to remove to showcase the attached presentation.
| Product | Code | Characteristics | |
|---|---|---|---|
| Aica Melt | 510D |
|
Request TDS |
| Aica Melt | 570R |
|
Request TDS |
| Aica Melt | 605 |
|
Request TDS |
| Aica Melt | 866P |
|
Request TDS |
Automotive
Car makers are moving towards hotmelt adhesives for automotive parts assembly as concern on environmental raw material components used.
At 
, we have range of products with strong adhesion, weathering resistance and customized open time to meet the production requirements of cost efficiency and quality standards in the automotive industry.
Polyolefin based and Aica Melt provide solutions for the lamination process in the floor carpet, parcel shelf, seats and door trims.
| Product | Code | Characteristics | |
|---|---|---|---|
| Synthetic Polymer (EVA) | 433 |
|
Request TDS |
| Aica Melt | 570R |
|
Request TDS |
| Aica Melt | 772 |
|
Request TDS |
| Polyolefin | 912X |
|
Request TDS |
Construction
Polyolefin based hot melts is the ultimate choice in the construction industry seeking superior bonding and easy cleaning hotmelt adhesives in the precast concrete production. The hotmelt is resistant to vibrations during production process and can be removed from the mould without leaving any residue once concrete process has been completed.
In the ceramic tiles industry, our Synthetic Polymer (EVA) range helps our customer to ensure tiles surface are well cushioned during storage and packing which leaves no scratch mark.
| Product | Code | Characteristics | |
|---|---|---|---|
| Synthetic Polymer (EVA) | 350 |
|
Request TDS |
| Synthetic Polymer (EVA) | 390N |
|
Request TDS |
| Synthetic Polymer (EVA) | 426T |
|
Request TDS |
| Polyolefin | 912X |
|
Request TDS |
HVAC
Polyolefin based hot melts played a major part in the assembly process of air conditioning and freezer unit. It is used to bond acoustic material in the air conditioning unit for noise reduction purpose and for sealing purpose in a freezer to prevent leakage during foaming process from Polyurethane.
| Product | Code | Characteristics | |
|---|---|---|---|
| Aica Melt | 736K |
|
Request TDS |
| Polyolefin | 912X |
|
Request TDS |
Mattress
Hotmelt adhesives for mattresses are preferred as they offer non-toxic, environmentally friendly solution and is easy to handle. As such, they are now becoming more popular to replace the traditional solvent based adhesives that has been used for decades.
Our products are mainly used for spring pocket joint and fixation bond of non-woven fabric, sponge and other materials in the assembly of mattress.
| Product | Code | Characteristics | |
|---|---|---|---|
| Synthetic Polymer (EVA) | 401C |
|
Request TDS |
| Synthetic Polymer (EVA) | 435C |
|
Request TDS |
| Aica Melt | 772 |
|
Request TDS |
| Polyolefin | 910A |
|
Request TDS |
| Polyolefin | 915A |
|
Request TDS |
Paper Converting
Paper products are becoming part of our daily life.
At , we provide solutions for all the processes of paper converting products such as production of shopping bags, sacks, cups, POP display and etc.
| Product | Code | Characteristics | |
|---|---|---|---|
| Polyolefin | 300 |
|
Request TDS |
| Polyolefin | 323 |
|
Request TDS |
| Synthetic Polymer (EVA) | 401 |
|
Request TDS |
Aica Melt is specially designed with unique properties to meet customers’ requirements in the assembly of various products like lid and consignment note pouch for LDPE and HDPE courier bags, car carpet and upholstery, electrical appliances, fibre optic cable and geo-synthetic textiles.
We have experienced R&D expertise to customize hot melts to meet our customers’ requirement for open time, viscosity, flexibility and temperature resistance. Our products are constantly redeveloped and researched to meet the increasing demand in the assembly processes, such as speed time, transportation & storing conditions, etc.
Pressure Sensitive
Pressure sensitive hotmelt are designed to have the right level of tack to enable bonds to be formed via pressure only. Aica Melt offers broad range of pressure sensitivity levels including removable and permanent.
Aica Melt is a light-colour and low-odour fugitive hot melt, a low-tack adhesive that produces a removable, non-permanent bond. Fugitive hot melt are widely used for sample attachment on magazine, brochure, and credit card affixing. This product provides temporary tack adhesion and will not damage paper or other substrate surfaces. It is clean and easy to remove to showcase the attached presentation.
Product
Aica Melt
Code
510D
Characteristics
- Translucent white glue block
- General purpose permanent paper application
- Laser printable label application
- Performs good tackiness at low and high temperature
Product
Aica Melt
Code
570R
Characteristics
- Yellow glue block
- High adhesion to various substrates
- High bonding strength (High peel adhesion)
- High initial tack (High loop tack)
- Security tape
- Sun visor
Product
Aica Melt
Code
605
Characteristics
- Off-white and translucent glue block
- Odourless
- Good heat stability
- Very low bonding strength (peel adhesion)
- Very low initial tack (loop tack)
- Fugitive glue
- Suitable for non-permanent attachment of wide variety of substrates such as PP, PE and OPP films, paper and non-woven
Product
Aica Melt
Code
866P
Characteristics
- Yellow glue block
- Excellent peel adhesion strength
- High initial tack
- For courier bag application
- Perform excellent strong adhesion on “lid adhesive” application for LDPE courier bags
Automotive
Car makers are moving towards hotmelt adhesives for automotive parts assembly as concern on environmental raw material components used.
At , we have range of products with strong adhesion, weathering resistance and customized open time to meet the production requirements of cost efficiency and quality standards in the automotive industry.
Polyolefin based and Aica Melt provide solutions for the lamination process in the floor carpet, parcel shelf, seats and door trims.
Product
Synthetic Polymer (EVA)
Code
433
Characteristics
- Yellow glue pellet
- Possesses good adhesion
- Long open time
- For bonding flexible foams
- For bonding cloth, paper and plastic substrates
- For car carpet assembly
Product
Aica Melt
Code
570R
Characteristics
- Yellow glue block
- High adhesion to various substrates
- High bonding strength (High peel adhesion)
- High initial tack (High loop tack)
- Security tape
- Sun visor
Product
Aica Melt
Code
772
Characteristics
- Yellow glue block
- Good bonding strength
- Good initial tack
- To bond a various range of substrates
- Car carpet and car seat
Product
Polyolefin
Code
912X
Characteristics
- Off-white glue block
- High heat resistance
- Long open time
- Good bonding strength properties
- Bonding between light weight substrates such as PP, PE and EVA foams, car carpet, car seat, papers, plastic films, HVAC assembly, precast mould and fabrics
Construction
Polyolefin based hot melt is the ultimate choice in the construction industry seeking superior bonding and easy cleaning hotmelt adhesives in the precast concrete production. The hotmelt is resistant to vibrations during production process and can be removed from the mould without leaving any residue once concrete process has been completed.
In the ceramic tiles industry, our Synthetic Polymer (EVA) range helps our customer to ensure tiles surface are well cushioned during storage and packing which leaves no scratch mark.
Product
Synthetic Polymer (EVA)
Code
350
Characteristics
- White glue pellet
- Used in ceramic industry as a spacer
- Protect the surface from scratching during packing and transportation
- Smooth surface to smooth surface
- Non residue and easy removable
Product
Synthetic Polymer (EVA)
Code
390N
Characteristics
- White glue pellet
- Used in ceramic industry as a spacer
- Non residue and easy removable
- Protect the surface from scratching during packing and transportation
Product
Synthetic Polymer (EVA)
Code
426T
Characteristics
- Yellow glue pellet
- Moderate open time
- For bonding of paper, wooden particle board and non-woven fabric
- Geotextile, prefabricated vertical drain
Product
Polyolefin
Code
912X
Characteristics
- Off-white glue block
- High heat resistance
- Long open time
- Good bonding strength properties
- Bonding between light weight substrates such as PP, PE and EVA foams, car carpet, car seat, papers, plastic films, HVAC assembly, precast mould and fabrics
HVAC
Polyolefin based hot melts played a major part in the assembly process of air conditioning and freezer unit. It is used to bond acoustic material in the air conditioning unit for noise reduction purpose and for sealing purpose in a freezer to prevent leakage during foaming process from Polyurethane.
Product
Aica Melt
Code
736K
Characteristics
- Clear yellow glue block
- Low viscosity
- Good initial tack
- For general purpose lamination
Product
Polyolefin
Code
912X
Characteristics
- Off-white glue block
- High heat resistance
- Long open time
- Good bonding strength properties
- Bonding between light weight substrates such as PP, PE and EVA foams, car carpet, car seat, papers, plastic films, HVAC assembly, precast mould and fabrics
Mattress
Hotmelt adhesives for mattresses are preferred as they offer non-toxic, environmentally friendly solution and is easy to handle. As such, they are now becoming more popular to replace the traditional solvent based adhesives that has been used for decades.
Our products are mainly used for spring pocket joint and fixation bond of non-woven fabric, sponge and other materials in the assembly of mattress.
Product
Synthetic Polymer (EVA)
Code
401C
Characteristics
- Yellow glue pellet
- Fast set time
- Moderate open time
- Very good bonding strength
- For automatic tray forming
- For carton closing operations
- Pocket spring
Product
Synthetic Polymer (EVA)
Code
435C
Characteristics
- Light yellow glue pellet
- Possesses good adhesion
- Long open time property
- For bonding flexible foams
- For bonding cloth, paper and plastic substrates
Product
Aica Melt
Code
772
Characteristics
- Yellow glue block
- Good bonding strength
- Good initial tack
- To bond a various range of substrates
- Foam to foam
Product
Polyolefin
Code
910A
Characteristics
- Opaque glue block
- Long open time
- Very good bonding strength
- Foam to foam
- Bonding between non-polar substrates such as rubber, PP, PE and metallic films
- Bonding between glossy finished and UV treated surfaces
- Bonding between a wide variety of fabrics
Product
Polyolefin
Code
915A
Characteristics
- Opaque glue block
- Long open time
- Very good bonding strength
- Good high heat resistance
- Foam to foam
- Bonding between non-polar substrates such as rubber, PP, PE and metallic films
- Bonding between glossy finished and UV treated surfaces
- Bonding between a wide variety of fabrics
Paper Converting
Paper products are becoming part of our daily life.
At , we provide solutions for all the processes of paper converting products such as production of shopping bags, sacks, cups, POP display and etc.
Product
Polyolefin
Code
300
Characteristics
- White glue pellet
- Premium grade synthetic hot melt
- Transparent and odourless
- Very good heat stability
- High heat resistance
- Very good hot tack
- Fast setting time
- High adhesion on difficult surface
- Performs well on difficult substances under cool condition
- Excellent processing and bonding adhesion
- Case sealing and tray forming in automated and semi-automated packaging operation
Product
Polyolefin
Code
323
Characteristics
- White glue pellet
- Premium grade synthetic hot melt
- Transparent and odourless
- Very good heat stability
- Very good hot tack
- Permit high speed machine
- Excellent processing and bonding adhesion
- High adhesion on difficult surface
- High mileage characteristics
- Medium open time
- Suitable for deep-freeze packaging
Product
Synthetic Polymer (EVA)
Code
401
Characteristics
- Yellow glue pellet
- Fast set time
- Moderate open time
- Very good bonding strength
- For automatic tray forming
- For carton closing operations
- Jumbo roll packing and paper bag
